 |
 |
 |
|
|
|
|
|
CIP (Cast - In - Place) Process |
|
• Basic Application • Multicolor with Cobble Circle Cobblestone Field and Border • Fishscale Pattern Release Agent and Faux Brick Textured Roller |
Multicolor with
Cobble Circle Cobblestone Field and Border |
|
|
|
 Stencil
Placement |
|
Stencil
Placement: Place the cobble circle in the desired location and slightly
embed it with a stencil roller. Unless the slab is small, this may require
walking in the concrete. Install the Cobble Header stencil around the
border and slightly imbed it with a stencil roller. Tracks in the field
area created by walking in the concrete must be repaired.  Place Old English Cobble Stone in the field area using the same techniques
outlined in the basic application. Trim away the excess Old English Cobble
Stone stencil where it overlaps the Cobble Circle. |
|
 Coloring |
|
| The base color is applied in the same manner described in the Basic Installation.
A contrasting complimentary color is applied to the Cobble Header. A shield
should be used to avoid getting the border color in the field area.
Accent colors are then applied to the field area. Care should be taken
in choosing the accent colors to assure that they are complimentary to
the base color as well as surrounding structures. The accent colors are
worked in and a steel trowel finish is applied. |
|
 Stencil
Removal |
|
| Stencils are removed when the concrete
will bear weight.
The debris is blown away and sealer
is applied as shown in the basic application. |
|
|
• Basic Application • Multicolor with Cobble Circle Cobblestone Field and Border • Fishscale Pattern Release Agent and Faux Brick Textured Roller |
| Technical Information | ||
| Cast In
Place Instructions (pdf): Click Here For the free acrobat reader: Click Here |
||
| Faux Brick ® NO-ADHESIVE Stencils
are available in 1,000 sq. ft., 500 sq. ft., and 100 sq. ft. rolls and Faux Brick ® ADHESIVE Stencils are available in 500 sq. ft. and 100 sq. ft. rolls. |
||
